SOLDER WIRE TRILENCE
solder wire TRILENCE is a new development for automated, robotized and manual high tech soldering. Its very low flux spitting guaranties a minimum of equipment cleaning while increasing the soldering quality. The solder wire flux TRILENCE is based on a halide activated synthetic resin composition, which ensures his good wetting properties.
2,7 % Flux / 0,8 % Halogen / REM1
- Minimum flux spitting
- Very good constant flow and wetting
- Clear and transparent residues
Thanks to its low tendency of spitting, transparent residues and high thermal capacity, the TRILENCE wire guarantees very clean solder joints. As there is nearly no spitting, your soldering equipment requires less maintenance and ensures therefore less shutdown periods. The Stannol TRILENCE solder wire is suitable for manual and automated soldering of electrical and electronic components. Any kind of automated soldering equipment can be used. Heat transfer can be done by using most kinds like laser, soldering iron, induction).
|GENERAL PROPERTIES HS10||HS10|
|Flux content:||2,7% /- 0,3%|
|Corrosion effect:||none, acc. to DIN 8516|
acc. to ISO 9453:2006
|LEAD-FREE (FLOWTIN SERIES):|
|Flowtin TC (Sn99Cu1 respectively Sn99,3Cu0,7)|
|Flowtin TSC305 (Sn96Ag3Cu1 respectively Sn96,5Ag3Cu0,5)|
|Available diameters:||from 0,3 mm|
|Available reel sizes:||250 g, 500 g, 1 kg|