Stannol Soldering Grease
The soldering grease is an emulsion of soldering concentrates in mineral greases for general soldering work. The pasty flux is used for soldering tinplate, leaded sheet, copper and copper alloys as well as for many other solderable metals.
To DIN 29454-1 3.1.1.C for soldering tin-plate, leaded sheet, and for tinning copper and brass.
Features
- Stannol Soldering Grease is an emulsion of a soldering concentrate in mineral greases for general soldering.
- This pasty flux is conforming to type 3.1.1.C according to ISO 9454-1 (DIN EN 29454-1).
- solder paste is not suitable for electrical enginneering and electronics.
- Suitable for tin-plate, leaded sheet and for tinning copper and brass.
- Application The surfaces to be soldered must be clean and free of oxides. If the surface is corroded, remove mechanically. Apply a thin layer of Soldering Paste and heat it up with a suitable device, e.g. soldering iron, and add some solder, which melts and spreads to form the solder joint.
- The minimum soldering temperature should be 50°C higher than the melting point (range) of the solder alloy. After soldering the flux residues should be removed.
Technical Data
|
Stannol Soldering Grease |
|
| Colour | Yellow |
| Drop point | 50 C |
|
Flux residues are corrosive |
|
| Packaging | 50 G – 100 G |
| Shelf Life | 2 years after date of delivery |
Health and safety
Do not breathe fumes, avoid contact whit skin and eyes. keep away from children. keep container tightly closed, store in a cool place (<30 C).
before using please read the material safety data sheet carefully and observ the safety precautions described.
Reviews
There are no reviews yet.