TRA – IC500/1200 | SMT Inspection Conveyor for PCB Assembly Lines
TRA IC-500 | SMT inspection conveyor
- Five nominal conveyor lengths: 500, 800, 1000, 1200 and 1500 mm.
- Adjustable PCB width: 50–350 mm or 50–460 mm, depending on model.
- Variable conveying speed of 1–12 m/min with automatic transfer and manual inspection modes.
- Antistatic belt transport with aluminium guide rails and manual width adjustment.
- Standard and overhead-light inspection configurations illustrated in the catalogue.
Download Datasheet
TRA SMT inspection conveyor
TRA-IC500/1200 | SMT PCB conveyor
The TRA IC (Conveyor) series SMT inspection conveyor connects equipment in a PCB assembly line and provides an accessible station for manual board inspection. Its adjustable rails accommodate different PCB widths, while variable belt speed allows the transfer rate to be set for the adjoining production process.
PCB inspection conveyor
Five lengths are available, from 500 to 1500 mm. The 500 and 800 mm models accommodate PCB widths from 50 to 350 mm; the 1000, 1200 and 1500 mm models extend the adjustable width range to 460 mm. These differences allow the conveyor to be selected around board dimensions and available line space.
SMT line conveyor
The transport mechanism combines an antistatic belt with aluminium guide rails. A front-mounted control panel provides power, speed and mode selection. The catalogue also illustrates an overhead-light version with a document holder for inspection workstations where operators need local illumination and access to work instructions.
Features | TRA-IC500 – Inspection Conveyor
Adjustable PCB Width
A manual screw adjustment mechanism changes the rail spacing to suit the board width. This supports changeovers between PCB formats within the selected model’s stated range.
Variable Transfer Speed
Conveying speed is adjustable from 1 to 12 m/min using a dedicated control knob, allowing operators to set the board transfer rate for their process.
Automatic Transfer and Manual Inspection
Two operating modes support board transport and operator inspection at the conveyor station. This is a manual inspection conveyor, not an AOI system.
Antistatic Belt and Aluminium Guides
The catalogue specifies antistatic belt transport and aluminum guide rails. The belt-and-rail arrangement supports guided movement of PCBs between adjacent machines.
Steel Body and Adjustable Feet
A reinforced steel body provides the supporting structure. Adjustable feet allow the conveyor to be levelled and aligned with adjacent equipment within the specified transport-height range.
Inter-Machine Signal Connection
The catalogue illustrates a standard signal cable for connection to neighbouring SMT equipment. Interface compatibility should be checked during line integration.
Overhead Inspection Lighting Configuration
The illustrated illuminated version adds an overhead light and a holder for process documents. This configuration supports a dedicated operator inspection position.
Features – TRA-IC 500/1200 | PCB inspection conveyor
- Transferring PCBs between compatible SMT production machines.
- Creating an operator-accessible manual inspection position in a PCB assembly line.
- Linking separate assembly processes through a controlled conveyor section.
- Providing an illuminated board-checking position using the overhead-light configuration.


Production Advantages – TRA-IC | SMT Line Conveyor
- Layout flexibility: Five conveyor lengths help match the space between production stations.
- Product changeover: Manual rail adjustment accommodates different board widths within each model’s range.
- Process adjustment: Variable belt speed allows the transfer rate to be set locally.
- Inspection access: Manual inspection mode supports board checking at an accessible station.
- Line alignment: Adjustable feet and the stated transport-height tolerance assist installation alongside compatible equipment.
Technical Data - TRA PCB conveyor
| Parameter | Specification |
| Power supply | AC 220 V, 50/60 Hz |
| Conveyor direction | Left to right |
| PCB transport height | 900 ±20 mm |
| Conveying speed | 1–12 m/min, adjustable |
| Main motor power | 15 W |
| Fixed rail | Front fixed; confirm rear-fixed configuration when required |
| Transport mechanism | Antistatic belt with aluminium guide rails |
| Width adjustment | Manual screw mechanism |
| Working modes | Automatic transfer / manual inspection |
| Levelling | Adjustable feet |
Available Sizes
| Model | Conveyor length (mm) | Listed PCB length (mm) | PCB width range (mm) | Overall dimensions, L × W × H (mm) | Net weight (kg) |
| TRA-IC500 | 500 | 500 | 50–350 | 500 × 670 × 880 | 41 |
| TRA-IC1200 | 1200 | 1200 | 50–460 | 1200 × 670 × 880 | 56 |
Download Datasheet
| Brand | TRA |
|---|
You must be logged in to post a review.































































Reviews
There are no reviews yet.