Vanstron Multi Magazine Unloader | Board Handling Equipment
Vanstron – Multi Magazine Unloader
- Magazine infeed and outfeed are automatically driving by motor on the platform.
- Stepper motorized type pusher to enhance working stability.
- Pusher position adjustable to Centre for the boards.
- Tower-light display for machines working status.
- SMEMA compatible.
Multi Magazine Unloader Vanstron
Vanstron Multi Magazine Unloader | Board Handling Equipment
The Automatic Unloader is designed for unloading of PCBs
an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The magazine indexes to the next position and is ready for the following unloading cycle. Connect with SMT and AI production line, safety design ensure not to break any PCB when it is pushed and thus reduce defect rate. Agility operation with high accuracy, automatic counting, fault alarm functions, it is required for a full range of automatic equipment.
Vanstron Multi Magazine Unloader | Board Handling Equipment
Multi Magazine Unloader Vanstron is designed with “90 degree “to save the SMT production line length as much as possible but without impacting the production throughout capacity.
| Model | Max PCB (L *W) MM | Min PCB (MM) | Machine Dimensions
(L*W*H) MM |
Magazine size (L*W*H)MM |
| ASUL-250M | 330*250 |
50*50 |
1010*1470*1650 | 355*320*563 |
| ASUL-330L | 440*330 | 1210*1700*1650 | 460*400*563 | |
| ASUL-390L | 530*390 | 1390*2110*1650 | 535*460*570 | |
| ASUL-460L | 535*460 | 1390*2110*1650 | 535*530*570 |
Mitsubishi PLC program control
Selectable pitch settings
Tower-light display for machines working status.
Flexible platform to suit standard magazines
Exchangeable magazine from the rear of magazine
Stepper motorized type pusher to enhance working stability
Pusher position adjustable to Centre for the boards
Use the friendly touch screen panel
Magazine infeed and outfeed are automatically driving by motor on the platform.
SMEMA compatible
Magazine capacity: Top 1+ Down 2, middle 1, total 4 magazines.
Full CE regulations safety cover
Selectable pitch 10mm up to 80mm
Auto/Manual run modes
Diameter 3mm edge Flat ESD belt
Component clearance: top 50mm bottom 25mm
Power: AC220V/110V, 50/60 HZ, 1 phase
Air Pressure: 5kgf/cm2
PCB Convey Direction: L-R (or R-L)
Front rail fixed (or rear rail fixed)
Conveyor height:900+50/-20mm (standard height for SMT application)
For AI application, please specify the height requirements
| Transfer heights | 900mm+/-50mm |
| Transfer direction | Left to right |
| Lifting platform
Max. weight loading |
Above 100kg |
| Operation side | Front of machine |
| Fixed rail | Front of machine |
| Interface | SMEMA |
| Conveyor belts | ESD flat belt |
| PCB edge support | 3mm |
| Magazine change over time | 30s (optional: 15s) |
| Allowable components clearance | Top 50 mm+ below 25mm |
| Magazine capacity | Top 1+down 2+ middle 1 |
| Safety | CE certificates |
| Control | PLC |
| Voltage | 220V/ 110V, single phase, 50-60Hz |
| Brand |
Vanstron |
|---|
You must be logged in to post a review.
Reviews
There are no reviews yet.