Weller WR 2002 – Professional PCB Rework Station
WR2002 – Weller Desoldering Station
- Power unit WR 2, 2 channels with soldering iron WP 80, desoldering iron DSX 80
- Small repair set for all rework applications
- Simultaneous operation of up to 2 soldering tools (hot air and desoldering iron at the same time is not possible)
Description
Weller WR2002
The Weller WR2002 is a professional 2-channel rework station based on the WR2 power unit, supplied with the WP80 soldering iron and DSX80 desoldering tool.
It delivers 250 W nominal power (up to 300 W peak), automatic tool recognition, precise temperature control, and full ESD safety — designed for advanced SMT/THT rework and professional repair labs.
Weller WR2002 – soldering station
What’s Included
- 1× WR2 rework power unit (2 channels)
- 1× WP80 80W soldering iron + stand
- 1× DSX80 desoldering iron + accessories
- Power cable and required accessories
Applications
WR2002 – ESD Safe Soldering Station
- Professional PCB repair & rework
- SMT & THT component removal and installation
- Service labs, repair centers, R&D, production support
Compatibility Notes
WR2002 – 2 Channel Soldering and Desoldering Kit
- WR2 supports multiple 200W class Weller tools
- WR2002 set cannot run hot-air and desoldering pump simultaneously (set limitation)
- Micro tweezers WMRP/WMRT are not supported on WR2
Features
Hot Air and Desoldering Station Weller
- Real 2-channel operation allowing two tools to work on the station (up to 300W combined)
- Supplied with:
- WP80 (80W soldering iron)
- DSX80 (desoldering iron with internal vacuum pump)
- High vacuum performance: up to 0.7 bar / ~20.7 inHg
- Pump airflow: up to 18 L/min
- Hot air / air-flow tools: approx. 10–15 L/min (depending on accessory)
- Temperature range approx. 50–550°C with ±9°C accuracy
- Automatic tool identification and ECO/standby modes to extend tip life
- Designed for both lead-free and leaded solder
Technical Data
| Height | 102mm |
| Length | 273mm |
| Dimensions L x W x H | 273.0 x 235.0 x 102.0mm |
| Automatic Tool Identification | Yes |
| Capacity (l/min) | 18 l/min |
| Desoldering | Yes |
| Equipotential Bonding Socket | Via 3.5mm jack bush (initial state-hard-grounded) |
| ESD Safe | Yes |
| Hot Air (picto) | Yes |
| IPC Compliant | (Tip to Ground) Corresponds to IPC-J-001D |
| Maximum Hot Air Flow Rate l/min (Depends on Tool) | 10 l/min |
| Noise level (distance 1 m) dB(A) | 0.7 bar |
| Number of Channels | 2 |
| Overcurrent Release | 1,6 A |
| Power | 250 W (300 W) |
| Temperature Accuracy °C | ± 9°C |
| Temperature Accuracy °F | ± 17°F |
| Temperature Accuracy for Hot Air | ± 30°C, ± 54°F |
| Temperature Range °C | 50 – 550 °C |
| Temperature Range °F | 150 – 950 °F |
| Temperature Stability °C | ± 2°C |
| Temperature Stability °F | ± 4°F |
| UPC | 037103305527 |
| Vacuum | 0,7 bar |
| Voltage | 230V |
| Weight (Catalog) | 6.70 kg |
| Product Family | Rework, Hot Air, Desoldering Stations |
Download Datasheet
Additional information
| Brand |
Weller |
|---|
TIP & NOZZLE
