PO/1 Additional shelf

Requires PO Main shelf to be installed.

• 2 versions: 30 cm depth and 40 cm depth
• Height adjustment: 1100 — 1800 mm
• Load capacity: 50 kg

PO/2 Underneath shelf

Not compatible with optional TP-01/P Drawer unit.

• Load capacity: 100 kg

EP Power panel

Basic configuration consists of 4 sockets placed in aluminium case with protective contact and 3 m cable. Panel can be equipped with additional sockets, earth leakage circuit breaker, automatic fuse and a phone jack.

• Nominal load capacity: 10 A
• Grounding cord cross-section: 0.75 mm

DL/A Workbench lighting

4 DL/A Workbench lighting DL/A Workbench lighting is placed in an aluminum case with 2 energy-efficient luminescent 54 W lamps, light direction regulation and shadowless reflector provided. Quick switching on without shimmering, no strobing freeze.

• Length: 1200 mm
• Height adjustmentable
• Illuminance at 1000 mm distance:
  • 1200 lux central
  • 800 lux peripheral

DL/S Workbench LED lighting

The case for lighting unit is made of aluminum, light direction regulation provided
2 versions: 900 mm length (for workbench width 1200 mm) and 1200 mm length (for 1500 mm and 1800 mm width workbenches)

• Light source: LED lamps (45/60 pcs.)
• Light flux: 4725/6300 Lm
• Power consumption: 33/45 W.
• Material of diffuser: opal acryl
• Height adjustable:  500 mm – 1500 mm

Under-shelf local lighting

Additional local LED lighting can be mounted to any workbench series Main Shelf and Perforated panel. Provides uniform illumination level. 120˚angle adjustment.

RK Bin rail

Aluminum rail for bin storage placed along workbench length.

• Load capacity: 10 kg

PFP Perforated panel

Panel can be equipped by different holders for additional equipment and tools storage.

PN Sloped shelf

Angle adjustment provides comfort monitoring of working equipment.

• Load capacity: 50 kg

IP Cantilever

It was designed for easy-to-reach attaching of drawings, lighting and instruments. IP Cantilever can be additionally equipped by retracing KL–1200 mechanism.

US-1 Corner worktop

Dimensions: 1200×500 mm

Optional drawer units

Storage solution for tools and components, no place on floor required.

New items – suspended drawer units TP-10/P and TP-20/P with reduced to 490 mm depth. It allows installing various additional equipment under a tabletop.

Dimensions:

• TP-01/P: 490 x 354 x 580 mm
• TP-02/P: 490 x 233 x 580 mm
• NEW! TP-10/P: 490 x 354 x 490 mm
• NEW! TP-20/P: 490 x 233 x 490 mm

Under-shelf local lighting

Additional local LED lighting can be mounted to any workbench series Main Shelf and Perforated panel. Provides uniform illumination level. 120˚angle adjustment.

Middle upright for all kind of workbenches

Middle upright is required for all 1/2 items, it consists of upright and transversal slat which differs according to workbench’s width.