TRA ULX-330 | Automatic PCB Magazine Unloading Machine
TRA PCB Magazine Unloader | ULX-330 for SMT Lines
- Automatic PCB collection into magazines at the end of an SMT production line.
- PLC control with a touchscreen operator panel.
- Ball screw lifting mechanism with high-carbon steel support columns.
- Left-to-right board transfer and a conveyor height of 900 ± 20 mm.
- AC 220 V, 50/60 Hz power supply with a rated power of 220 W.
TRA PCB Magazine Unloader – ULX-330
Automatic PCB Unloader
The TRA ULX-330 is an automatic PCB unloader designed to collect boards from an SMT production line and transfer them into a magazine. It receives boards from the upstream machine and uses a pushing mechanism to place them into the rack, reducing repeated manual board collection at the line exit.
TRA ULX-330 Magazine Unloader
A PLC control system coordinates operation, while the touchscreen provides the operator interface. The lifting assembly uses a ball screw and high-carbon steel columns to support stable rack positioning. The machine also incorporates a braking system, fault indication and an emergency-stop control.
PCB Magazine Unloader
With left-to-right transfer and a conveyor height of 900 ± 20 mm, the ZBXBJ350 can be considered for magazine-based collection in compatible SMT line layouts. Board dimensions, component clearance, magazine compatibility and the connection interface should be matched to the production requirements when selecting the machine.
Features – ULX-330 | Magazine UnLoader
Automatic Magazine Unloading
Boards arriving from the preceding machine are collected and pushed into a magazine. This provides an organized collection point for subsequent handling and reduces routine manual removal from the conveyor.
PLC Control and Touchscreen Operation
The PLC manages machine operation, and the touchscreen gives operators a central control interface. The catalogue identifies both features for this model without specifying a PLC brand or software functions.
Ball Screw Lifting System
The lifting mechanism combines a ball screw with high-carbon steel support columns. This arrangement supports controlled rack movement and positioning during the unloading sequence.
Braking System
A dedicated brake supports positioning of the moving assembly. This helps the lifting mechanism stop at the required position during rack handling.
Fault Indication and Emergency Stop
The catalogue describes error checking with audible, visual and text indications. An emergency-stop button is shown on the machine, providing a readily accessible stop control.
Adjustable Conveyor Rails
The illustrated rail-width adjustment supports setup for different board widths within the machine’s compatible operating range. The complete PCB size envelope should be confirmed for the intended boards.
Connection to Automated Equipment
A line connection interface is provided for coordination with other automated machines. Interface compatibility should be verified during line configuration.
Features – ULX-330 | Magazine UnLoader
- Automatic board collection at the end of a compatible SMT assembly line.
- Transfer of completed boards from an upstream conveyor into magazines.
- Magazine-based handling between production and subsequent processes.
- Upgrading a manual board collection station to automated unloading.
Production Advantages – TRA ULX-330 | SMT PCB Magazine UnLoader
- Less repetitive handling: Automatic transfer into a magazine reduces routine manual board collection.
- Organized output: Boards are collected in a rack for subsequent handling.
- Controlled rack positioning: The ball screw lift and brake support repeatable positioning during unloading.
- Visible fault information: Audible, visual and text indications help operators identify a machine interruption.
- Practical layout planning: Published overall dimensions, conveyor height and transfer direction support assessment of the available line space.
Technical Data - TRA ULX-330 Unloader
| Brand | TRA |
| Parameter | ULX-330 |
| Machine type | Automatic PCB Magazine Unloader |
| Control | PLC with touchscreen |
| Power supply | AC 220 V, 50/60 Hz |
| Rated power | 220 W |
| Supply air pressure | 5 kgf/cm² |
| PCB transfer direction | Left to right |
| Conveyor height | 900 ± 20 mm |
| Overall dimensions | 1680 × 765 × 1250 mm |
| Net weight | 230 kg |
| Lifting mechanism | Ball screw with high-carbon steel support columns |
| Brand | TRA |
|---|
You must be logged in to post a review.































































Reviews
There are no reviews yet.