PLASTIK Spray is a Transparent Protective Conformal Coating for PC Boards and Electronic Components.
PLASTIK Spray is based on an acrylic resin particularly suitable for the electronic industry. It forms a shiny, flexible and protective film that is resistant to acids, salt, fungus, corrosive vapors, thermal stress, mechanical abuse, alkalis, alcohols, moisture, and tough environmental conditions. It retains its effectiveness within a wide range of temperatures from –70°C to +120°C. The lacquer adheres to various materials such as metal, plastics, wood, cardboard, glass etc. PLASTIC does not drip and permits soldering through its own layer. PLASTIC contains an UV indicator for quality control. PLASTIC meets MIL-I-46058C. „Type Acrylic Resin“. PLASTIC protects printed circuit boards, components, wire cables, etc. Elimination or prevention of creepage current, corona effects, short-circuits or discharges. PLASTIC seals out water, dirt and moisture and is an ideal corrosion protection of parts subjected to bad atmospheric conditions. It is water proofing of various materials such as cardboard, wood, leather, etc.
|Drying conditions at||25 min dry to touch
48 h totally cured
|Specific gravity (20° C)||0,88 g/cm³|
|Viscosity||12s (DIN 53211)|
|Resistance||to acids, salt, corrosive vapors,
thermal stress, alkalis, moisture
|Temperature resistance||-70°C bis 120°C|
|Dielectric strength||21 kV/mm|
|Surface resistance||5 x 1014 Ohm|
|Insulation resistance||1014 Ohm|
|Coverage||5 – 8 m2 /400 ml can|