Vanstron Multi Magazine Loader | Board Handling Equipment
Vanstron – Multi Magazine Loader
- Conveyor height:900+50/-25mm (standard height for SMT application).
- Magazine capacity: Top 1+ Down 2, middle 1, total 4 magazines.
- The Magazine Loader is designed for loading of PCBs.
- Full CE regulations safety cover.
- Auto/Manual run modes.
Multi Magazine Loader
Vanstron Multi Magazine Loader | Board Handling Equipment
The Magazine Loader is designed for loading of PCBs
The unit loads your production line automatically by pushing PCB’s out of a magazine onto the conveyor of the down-stream machine. Connect with SMT and AI productions line, safety design ensure not to break any PCB when it is pushed and thus reduce defect rate.
With high accuracy, automatic counting, fault alram functions, it is required for a full range of automatic equipment.
Multi Magazine Loader – Board Handling Equipment | Vanstron
Multi Magazine Loader “90 degree “to designed with save the SMT production line length without impacting the production throughout capacity.
| Model | Max. PCB (L *W) MM | Min PCB (MM) | Machine Dimensions
(L*W*H) MM |
Magazine size (L*W*H) MM |
| ASL-250M | 330*250 |
50*50 |
1010*1470*1650 | 355*320*563 |
| ASL-330L | 440*330 | 1210*1700*1650 | 460*400*563 | |
| ASL-390L | 530*390 | 1390*2110*1650 | 535*460*570 | |
| ASL-460L | 535*460 | 1390*2110*1650 | 535*530*570 |
Mitsubishi PLC program control
Selectable pitch settings
Tower-light display for machines working status.
Flexible platform to suit standard magazines
Exchangeable magazine from the rear of magazine
Stepper motorized type pusher to enhance working stability
Pusher position adjustable to Centre for the boards
Use the friendly touch screen panel
Magazine infeed and outfeed are automatically driving by motor on the platform.
SMEMA compatible
Magazine capacity: Top 1+ Down 2, middle 1, total 4 magazines.
Full CE regulations safety cover.
Selectable pitch 10mm up to 80mm.
Auto/Manual run modes.
Diameter 3mm edge Flat ESD belt.
Component clearance: top 50mm bottom 25mm.
Power: AC220V/110V, 50/60 HZ, 1 phase.
Air Pressure: 5kgf/cm2.
PCB Convey Direction: L-R (Or R-L).
Front rail fixed (or rear rail fixed).
Conveyor height:900+50/-25mm (standard height for SMT application).
For AI application, please specify the height requirements.
| Transfer heights | 900mm+/-50mm |
| Transfer direction | Left to right |
| Lifting platform
Max. weight loading |
Above 100kg |
| Operation side | Front of machine |
| Fixed rail | Front of machine |
| Interface | SMEMA |
| Conveyor belts | ESD flat belt |
| PCB edge support | 3mm |
| Magazine change over time | 30s (optional: 15s) |
| Allowable components clearance | Top 50 mm+ below 25mm |
| Magazine capacity | Top 1+down 2+ middle 1 |
| Safety | CE certificates |
| Control | PLC |
| Voltage | 220V/ 110V, single phase, 50-60Hz |
| Brand |
Vanstron |
|---|
You must be logged in to post a review.
Reviews
There are no reviews yet.