Flux X33 – Stannol
Flux X33 is NO CLEAN, RESIN-FREE, HALIDE-FREE.
SUSTAIINED ACTIVITY FLUX Stannol X33-12i is a no clean, resin free, halide free liquid flux for surfaces with poor solder ability.
• Maximum process window and sustained activity – without resin
• High speed soldering on conventional leaded and SMD components – no bridges or icicles
• Good through hole penetration
• No cleaning – reduces costs
• Minimal residues to interfere with ATE probes without cleaning
• Compatible with rosin and OSP based surface preservatives
• Foam, spray or wave application
APPLICATIONS of Flux X33
Recommended for consumer electronics and general electrical soldering
applications, particularly where high throughput is desirable.
This is a robust product. Its process window is greater than that of the
demand for high performance/reliability.
RECOMMENDED OPERATING CONDITIONS
The Printed Circuit Board: Flux X33 (Stannol X33-12i) is recommended for use on clean copper or tin-lead coated PCBs. It will solder satisfactorily over most surface preservatives. It is recommended that these are applied no longer than 3 months before soldering, since the period of protection is limited dependent on storage conditions. Stannol X33-12i has been formulated to work over a wide range of solder resists.
The solvent system in Stannol X33-12i has been designed for optimum wetting of surfaces but prolonged contact with polystyrene, PVC or polycarbonate is not recommended. Machine Preparation: When switching to X33-12i from any other flux, ensure all fingers, pallets and conveyors are thoroughly cleaned. Fluxing: Stannol X33-12i has been formulated for use in foam, spray or wave fluxers in the same way as ordinary fluxes on standard wave soldering machines.
| General Properties | X33-12i |
| Color | Colorless |
| Smell | Alcoholic |
| Solids content | 2.9% |
| Halide content | Zero |
| Acid value (on liquid) mg KOH/g | 22.5 |
| Specific gravity at 25°C (77°F) | 0.810 |
| Flashpoint (Abel) | 12°C (53°F) |
| Thinners | PC70i |
| IPC-TM-650 Copper Mirror Test | Pass |
| J-STD-004 classification | ORM0 |
| EN 29454 classification | 2.2.3 |
| Brand |
Stannol |
|---|
1 review for Flux X33 – Stannol
Show reviews in all languages (4)
You must be logged in to post a review.
Far –
Its Very Good