Zero Smog 20T Fume extraction
Fume extraction unit 230 V / 50 Hz, for tip suction with built in turbine
Up to 20 FE soldering irons can be connected
Description
Zero Smog 20TUp to 6 WellerFT (Fume Extraction) soldering irons can be connected directly to the fume
extraction unit ZS 20T. Using the Pipe System 50 (available as accessory) up to 20 FE soldering irons can be supported by the unit. The powerful maintenance-free turbine generates a vacuum of 10.000 Pa and is
electronically controlled. Operating hours and filter contamination level are also recorded electronically. The filter system achieves a filtration rate of 99,95 % as per EN 1822 with a particle size of 0,16 μm. Up to 20 FE soldering irons can be connected
Electric driven, maintenance free turbine produces the required vacuum
Mobile unit for central and stand alone applications
Central installation for 50 mm pipe systems up to 200 m (656 ft.) lenght possible.
|
|
 |
This station is ESD safe. |
| Dimensions L x B x H | 450 x 450 x 695 mm |
| Weight | 45 kg |
| Mains supply voltage | T005 36 706 99: 230 V / 50 Hz T005 36 702 99: 120 V / 60 Hz |
| Electrical power rating | 530 VA |
| Fuse | T 3, 15 A |
| Maximum vacuum | 10.000 Pa |
| Maximum quantity supplied | 100 m3/h |
| Noise emission level | 51 dB(A) |
| Pre filter Stage 1 | Pre filter mat class F7 |
| Combined filter Stage 2,3 | Combined E12 high efficiency submicron filter (99.95 % particle separation upto 0.12 μm) and wide band gas filter (50 % activated carbon, 50 % Puratex) |
| RS232 port | All system functions can be operated and remotely monitored via the RS232 port. |
| USB port | The USB port can be used to load firmware updates, run efficiency tests and log data. Do not leave the USB medium inserted for longer than 2 minutes. After this time expires, the USB module will switch off automatically. |
Additional information
| Brand |
Weller |
|---|
Reviews (0)
You must be logged in to post a review.
Reviews
There are no reviews yet.